MILLAT TINE TILLERS

• Ideal for general cultivating, weeding, pasture renovating and preparing seedbeds.
• The tiller is available in 4 widths: 9, 11, 13 and 15 tines. The tiller is fully mounted on the tractor by means of Category I or II three point hitch pins.
• The spring-loaded tines swing back under break-away pressure of 163 Kg: pass over the obstruction and return to the working position without affecting the working depth of the implement.
• The continual flexing action of the tines shatters the soil breaking up the clods.
• The tiller is fitted with 51 mm reversible shovels which are designed for deep penetration.
• A working depth up to 229 mm is possible in most soils and is simply controlled while sitting on the tractor seat.

Specification

MILLAT AGRICULTURAL LOADER

• A multipurpose rugged and powerful machine which can be quickly attached/detached to the front of MILLAT Tractors for handling/loading stone/brick crush, garbage, sand, grains, wood loge etc. into a truck or trailer

Specification

MILLAT DISC PLOUGH

Used for deep ploughing in root-infested, sticky, stony, and hard soils. Mixes remains of crops and weeds throughout the depth of ploughing, hence ideal for rain-fed areas for checking soil erosion by water and wind.

• Spring loaded floating rear furrow wheel controls the side draft to ensure straight work and ease of handling by smaller tractor.
• Re-greasable Taper Roller Bearings in disc hubs.
• Disc angle adjustable to vary the penetration with varying soil conditions.
• Cat I & II linkage.
• Disc Scrapers are adjustable to ensure that the Discs remain clean in all conditions.

Specification

MILLAT HYDRAULIC TRIPPING TRAILER

• Farm trailer provides cost effective means of farm transportation.
• All steel body robust construction trailers provide a selection of sizes from 3.5-12 Tons.

Specification

MILLAT FRONT BLADE

• The Power Dozers are designed and built to match the performance of the MILLAT tractors.
• They are operated hydraulically by single or twin double acting rams.
• The points of attachment of the dozer to the tractor are reduced to an absolute minimum and the mounting brackets, once fitted, can be left in position enabling the sub-frame and blade to be quickly removed and attached.
• The blade is fitted with a reversible and replaceable cutting edge of high carbon steel.

Specification

MILLAT JIB CRANE

• There are many jobs around the farm that often involve back breaking work and much effort-jobs like loading and unloading large drums of fuel, feed, seeds, fertilizer bags, building materials, machinery and similar chores.
• The Jib Crane provides the answer to all these problems and they can all be handled with a minimum of effort from the seat of your tractor.
• Ruggedly constructed from tubular steel, the crane is capable of lifting a load up to 500 kg. The goose-neck design makes it particularly handy for loading and unloading trucks and trailers.
• Used almost daily on any farm.
• Simple - one minute attachment.
• It is recommended that the stabilizer bar chain be used if transporting over rough ground. Height of lift adjustable.

Specification

MILLAT MACHION LAWN MOWER

• Tractors Mounted PTO driven grass mower, suitable for lawns, sports areas and public gardens.

Specification

MILLAT MOULD BOARD PLOUGH

• The most important plough for primary tillage in canal irrigated or heavy rain areas where too much weeds grow.
• The objective for ploughing with a Mould Board is to completely invert and pulverize the soil, up-root all weeds, trash and crop residues and bury them under the soil.
• The shape of Mould Board is designed to cut down the soil and invert it to right side completely burying the undesired growth which is subsequently turned into manure after decomposition.

Specification

MILLAT OFFSET DISC HARROW

MOUNTED CUM TRAILED

• The Offset Disc Harrow has a heavier weight per Disc and thus has the penetration ability to break down large clods normally left after disc ploughing or Chisel Ploughing in hard grounds. It is of robust construction, used as mounted or trailed and ideal for chopping and mixing of stubbles and crop residues in the soils.
• The Disc Harrow prepares the seed-bed leaving the soil in granular form which is the most suitable structure for plant growth. It aerates the soil, helps to conserve moisture for longer periods and eradicate weeds.
• In sandy loam soils, this implement can also be used as primary tillage implement. The depth of ploughing is regulated simply by manipulating the offset angles of the gauges. By removing simply a pin, the mounted position can be converted into trailed position and vice versa.

Specification

MILLAT POST HOLE DIGGER

• Post Hole Digger is a PTO driven machine that digs holes in rows on equal distances mechanically and economically.
• Best suited for tree plantation.
• Also can be used for hole making for electric poles and farm hedges.
• It can dig about 90 cm deep hole of even diameter in just 30 seconds.
• By detaching Augers, it can be used as a small crane.

Specification

MILLAT RIDGER

• Used for making ridges for planting tobacco, potato and other vegetables.
• The ridger is fully adjustable for giving different accurate row widths.
• To obtain the correct ridge profile and retain soil flow, the high grade mould boards are adjustable.
• The ridger can also be used for earthing up the crops sown in rows.

Specification

MILLAT SWINGING DRAW BAR

• Ideal gadget for towing any type of farm load including trailed implements, by attaching it to a tractor under center axle housing.
• Can be fitted to MILLAT 240. MILLAT 350, MILLAT 260, MILLAT 375, MILLAT 385 and MILLAT 385 4WD tractors. The swinging draw bar conforms to British Standard having a Clevis hitch point at 36 mm (14 inch) from the PTO shaft.
• The maximum static load for the drawbar is 771 kg (1700 Lb.) with the draw bar in the outer position and 998 kg (2200 Lbs.) in the inner position.
• The draw bar height is adjustable in relation to the PTO center line.

Specification

MILLAT RICE PUDDLER

For Profitable Farming

Benefits

• Millat Rice Puddler saves the time and diesel by 50%.
• It saves water and increases production due to better field preparation.
• Millat Puddler is the only substitute for all combinations like cultivator, rotavator and trailing board.
• It needs only one cycle in field to gain best quality rice puddling.

Features

• Front tines dig the soil, the puddler puddles the soil and the trailing board keeps the soil in the level.
• As there is no PTO shaft, there is no load on tractor.
• It takes 20-25 minutes to prepare one acre to cultivate rice.

 

Specification

Millat Adjustable Pintle Hook

• Ideal gadget for towing any type of Farm Trolley/Trailer, by attaching it to the tractor at rear.
• Can be fitted with Millat 240, Millat350 Plus, Millat 260, Millat 360, Millat 375, Millat 385 (2WD) and Millat 385 (4WD) tractors. Can pull 5 Tons to 10 Tons of trailer load.

Specification

JF60 MAXXIUM S3 CHOPPER (PTO Driven)

(Tractor PTO Powered) The Most Productive and Reliable Ones in the Market

• Imported from world renowned “JF”, Brazil, supported by after sale services, warranty & availability of spare parts by Millat Tractors Limited.
• JF 60 Maxxium S3 Chopper chops grass, sunflower, sugar cane, maize and sorghum with excellent uniformity of particles, besides being machines with simple operation and maintenance.
• High cut size uniformity with sizes: 5 and 13 mm or 8 and 13 mm (Cut sizes 8 and 13 mm are optional).
• Easy and quick handling.
• Suitable Tractors: MILLAT 240, MILLAT 350 Plus.

 

Specification

BALER MF 1839

Fuss-free Bailing Imported from USA, AGCO (MF)

• MF 1839 baler makes high quality square bales that are of right size for easy handling and the right density for efficient storage season after season.
• MF 1839 baler is based, uniquely, on a ‘center-line’ design, with provides efficient crop handling, in which the crop flows through the baler in a straight line which eliminates side drifts, minimizes damage to the crop.
• The center-line design and large flywheel helps to keep tractor power requirement low- only 35 PTO hp on the MF 1839.
• MF 1839 has a low profile pick up which gently lifts the crop a short distance and feeds it directly into the chamber, reducing crop damage and leaf loss besides improving crop feed and increasing working speed.
• A single hand crank allows the operator to quickly raise and lower the pick-up which means that the transportation of the baler is easy on roads as well as in fields.
• Heavy duty, rugged knotters are designed and built to operate reliably over many years with minimum fuss or maintenance whether using plastic or sisal twine.
• Twine boxes are located on either side of the baler for easy twine replenishment.
• Supported by after sale services, warranty and availability of spare parts by Millat Tractors Limited.
• Compatible Tractors: MILLAT 260 (60hp) , MILLAT 360 (60 hp).

 

Specification

JF92Z10 FODDER HARVERSTERr

(with single row Maize Head) One of the Top Selling Forage Harvester in the World

• Imported from world renowned “JF”, Brazil, supported by after sale services, warranty, availability of spare parts & driver training by Millat Tractors Limited.
• Directly harvests and chops (sown in row) fodders like Maize, Sorgham, Millet etc.
• Also, suitable to cut and chop cotton sticks from the fields.
• Options for highest variety of chop sizes.
• Fast and easy change of chop size due to robust and well built gear box.
• Suitable Tractors: MILLAT 375 (75hp), MILLAT 385 (85hp).

Specification

MILLAT JF60 MAXXIUM CHOPPER (ELECTRIC MOTOR OR PETER ENGINE DRIVE)

(Operates with Electric Motor/Peter Engine) The Most Productive and Reliable Ones in the Market

• Imported from world renowned “JF”, Brazil, supported by after sale services, warranty & availability of spare parts by Millat Tractors Limited.
• JF 60 Maxxium Chopper chops grass, sunflower, sugar cane, maize and sorghum with excellent uniformity of particles, besides being machines with simple operation and maintenance.
• High cut size uniformity with sizes: 5 and 13 mm or 8 and 13 Mm (Cut sizes 8 and 13 mm are optional)
• Easy and quick handling

Specification

JF1300 GRASS HEAD

(Attached with JF 92Z10) More Forage, More Profit

• JF 1300 Grass Head is attached with JF 92Z10 for field operations. The combination of JF 92Z10 with JF 1300 guarantees superior quality output and chopping uniformity.
• The cutting and gathering is performed by a resistant 3-disc cutter bar and its transmission is safe, simple and heavy duty.
• Imported from world renowned “JF”, Brazil, supported by after sale services, warranty, availability of spare parts & driver training by Millat Tractors Limited.
• Application: spread grass, oat, barley, alfalfa (Barseen, Lusan), Jae and others.
• Suitable Tractors: MILLAT 375 (75hp), MILLAT 385 (85hp).

Specification